Silicone & Neoprene Hose Specifications

CHARACTERISTICS
Series HT:     -75 Degrees to 550 Degrees F
Series LT:     -65 Degrees to 300 Degrees F
  • Tolerance on length +/-1/4" per foot, +/-.010 available
  • Diameters between nominal 1" increments readily available
  • Applications: liquids, air, and flowable solids for Aircraft and commercial use.
Chemical Resistance
Series LT
Series HT

Oils & Solvents
Fair
Poor

Acid, Alkali, H2O & Fungus
Excellent
Good to Excellent

Ozone & Weathering
Good
Excellent

Inside Diameter Inches

1

2345678910 
Pressure in
PSIG*
Working

125

100807050352520510HT
10075504030252015108LT
Proof2502001601401007050403020HT
20015010080605040302016LT
Burst37530024021015010575604530HT
300225150120907560453024LT
Maximum leakage in CFM/ft. of length at 20 PSIG

.01

.01.01.01.01.01.01.01.01.01

HT

.02.02.02.02.02.02.03.03.03.03LT
Minimum bend radius to C/L of Duct in inches

.09

1.82.73.64.55.46.37.28.19.0HT
LT
Compressibility of line section in percentages

50

505050505050505050

HT
LT

Standard soft cuff length**

1.5

1.51.51.52222.52.52.5HT
LT
Maximum negative working pressure in PSIG

13

1175433221HT
LT
Weight per foot in pounds

.20

.40.60.801.01.21.41.61.82.0HT
.15.30.45.60.75.901.01.21.31.5LT

*All tests were conducted with duct in straight position.  **Tolerance on soft cuff = +/- 1/4"